Fischer Fire Stop FiAM

Flexible Fire Resistant Acoustic Mastic

DESCRIPTION

Fischer Fire Stop FiAM is a one part water based acrylic emulsion that can provide up to 5 hours fire resistance when used in construction joints and services in both vertical and horizontal applications. When exposed to fire, it reacts to form a highly insulative char that slows down heat transfer, and provides a barrier to fire seal.Tested to BS EN1366-3 & 4, UL 2079 and BS476-20 the Fischer Fire Stop FiAM is also ETA appoved and CE Marked. Formulated to be halogen and solvent free the Fischer Fire Stop FiAM exhibits excellent slump characteristics and has been designed to maintain the sound reduction index of a structure.Suitable compatibility in a variety of materials, such as timber, steel, concrete, drywall and brick/block work, and is utilised within the fischer FCPS Coated Panel System, which is design to seal large openings in fire rated floors & walls.

ADVANTAGES

•  Water based
•  Low VOC
•  Movement capability ± 20%
•  Excellent acoustic properties
•  Approved for infinite linear gap length
•  Halogen & solvent free
•  Paintable

APPLICATIONS

•  Metallic Pipes – 159mm (6″)
•  Cables trays – 450 x 50mm (18” x 2″)
•  Cable Bunches – 80mm (3″)
•  Linear Joints – Flexible & Rigid Construction Elements
•  Joints between FCPS Coated Panel System

BUILDING MATERIALS

Suitable for:

•  Flexible wall constructions
•  Rigid floor and wall constructions
•  Masonry
•  Concrete
•  Timber
•  Steel
•  FCPS System

INSTALLATION

Note: Firestop material must be installed in accordance with detailed instructions or the approved system.

1.  Clean all contact surfaces so they are free from loose debris and contaminants.
2.  Install the required backing material as per the detailed instructions or approved system.
3.  For best application results – Fischer Fire Stop FiAM should be at room temperature.
4.  ApplyFischer Fire Stop FiAM to required parameters as per detailed instruction or approved system making sure that it is in contact with all surfaces to provide maximum adhesion.
5.  Tool sealant to a defect free finish using a wetted trowel or putty knife.
6.  Clean all equipment with water immediately after use.

Fischer Fire Stop FiAM Fascebook Page Visit