Compact Miter Saw Stand
৳ 0.00
- Universal design works with all brands of miter saws
- Non-marring feet on tool mount will not scratch material
- Miter saw not included
... people are viewing this right now
Product Overview
The DWX724 Compact Miter Saw Stand is designed to work with all brands of miter saws. Compact design and lightweight aluminum construction (29.8 lbs.) allows for easy transport and leg lock levers allow quick set up. 40″ beam extends to support up to 10 ft. of material and up to 500 lbs.
Additional Features
- Compact design allows easy transport and storage
- Lightweight aluminum construction (29.8 lbs.) allows for easy transport to and from the jobsite
- 40″ beam extends to support up to 10 ft. of material and up to 500 lbs
- Legs provide superior support and fold for easy storage
- Leg Lock Levers allow for fast and easy set up
- Extension Lock Levers allow for fast and secure locking of extensions
- Tool mounting brackets allow easy and scure mounting of miter saw to stand
- Work stops/supports can be repositioned quickly anywhere along the rail
Specifications
Color | Silver, Yellow |
Is it a Set? | No |
Open Width [in] | 100 |
Product Height [in] | 32.0 |
Product Length [in] | 11.5 |
Product Weight [oz] | 476.8 |
Product Width [in] | 40.0 |
Type of Connectivity | No |
Includes
- (2) Convertible Work Support/Stops
- (2) Mounting Brackets
- (1) Compact Miter Saw Stand
Related Products
5.5 HP Belt Drive Gas-Powered Wheelbarrow Air Compressor (8 gal) (150 PSI) Read more
- High-flow regulator provides maximum air flow for peak tool performance
- 150 PSI maximum pressure for optimum tool performance
- Twin “wheelbarrow” tank design with 10 in. center mount turf tread for easy maneuverability over rough terrain and job sites
4-1/2 in. – 5 in. Paddle Switch Grinder with No Lock-On Read more
- Anti-Rotation E-CLUTCH® System activates in less than a tenth of a second when a pinch/stall is detected, shutting down the motor
- 11,000 RPM Rating
- 13A Motor
20V MAX* 14ga Swivel Head Double Cut Shears
৳ 51,000.00Add to cart
- 360 degree tool free swivel head which allows user to access tight quarters while maintaining comfort
- Cuts 7/32″ strip which continuously curls out of the cutting area providing consistent and accurate cuts
- LED work light illuminates surface
20V MAX* Compact Drill/Driver and Impact Driver Combo Kit
৳ 0.00Add to cart
- DCD780 20V MAX* 1/2″ drill/driver features two-speed transmission (0-600 / 0-2,000)
- DCF885 20V MAX* 1/4″ impact driver features 3 led lights with 20-second delay to provide visibility without shadows
1.1 HP Continuous Electric Hand Carry Compressor (4 gal)
৳ 40,900.00Add to cart
- 4.0 CFM delivered @ 90 PSI pump provides rapid recovery
- Oil lubricated pump improves durability
- Cast iron cylinder enhances pump life
1/2 in. (13 mm) VSR™ Drill
৳ 12,900.00Add to cart
- Helical-cut steel, heat-treated steel gears for long life and durability
- Metal gear housing for jobsite durability and increased reliability
- Two-finger trigger for increased comfort
20V MAX* 4-Tool Combo Kit
৳ 0.00Add to cart
- DCD780 20V MAX* 1/2 in. drill/driver features two speed transmission(0-600/0-2000RPM)12345
- DCS381 20V MAX* reciprocating saw with keyless blade clamp allows for quick blade change without touching blade or reciprocating shaft
- DCF885 20V MAX* 1/4 in. Impact Driver features 3 led light ring withe 20 second delay to provide visibility without shadows
20V MAX* XR® 16 GA Angled Finish Nailer – Kit Read more
- 100% battery powered. Eliminates the hassle of using gas, compressor, and hose
- Compatible with all DEWALT 20V MAX* batteries
- Brushless motor maximizes runtime and durability
ATOMIC™ 20V MAX* Brushless Compact 1/2 in. Drill/Driver Kit
৳ 0.00Add to cart
- Compact at only 6.3 in. front to back designed to fit in tight spaces
- Lightweight at only 2.4 lbs
- LED foot light for superior visibility
20V MAX* XR® 5 in. Flathead Paddle Switch Small Angle Grinder with KICKBACK BRAKE™ Read more
- Brushless motor requires no brush changes
- Kickback Brake engages when a pinch, stall, or bind-up event is sensed and the electronic brake engages with maximum force to quickly stop the wheel, reduce the movement of the grinder and shut the grinder off
- Power-loss reset® – the on/off trigger switch has a no-volt release function. in the event of a power outage or other unexpected shut down, the trigger switch will need to be cycled (turned off and then on) to restart tool
DW7080 Extension Kit
৳ 0.00Add to cart
- Provides additional material support
- Includes 1 pair of 20″ rods, end plate, and all mounting hardware
Reviews
There are no reviews yet.