UT620 series is used to measure DC low resistance through 4-wire method. Some of their features are Comparison function to determine if the device is in good condition, unknown wire length calculation (FT/M); two-way data transmission by USB interface; built-in rechargeable lithium battery.
UT658 series USB testers are used to inspect USB chargers and portable power source of electronics products. UT658 series can output voltage, current, and power.
Specification |
||
| Max power measurement | 5~800W | ±(1.0%+10) |
| Max power current(DC) | 0~35A | ±(1.5%+5) |
| Max power voltage(DC) | 12~60V | ±(1.5%+5) |
| Open circuit current(DC) | 12~60V | ±(1.5%+5) |
| Short circuit current(DC) | 0~35A | ±(1.5%+5) |
| General Features | ||
| Display | Large LCD (52 * 66mm) | |
| Reverse polarity connect Protection |
√ | |
| Over voltage protection | √ | |
| Over current protection | √ | |
| Over temperature protection | √ | |
| Over power protection | √ | |
| Manual/Auto MPPT test | √ | |
| Data hold | √ | |
| Power supply | No battery needed, powered by solar panel | |
| Ovecategory | CAT 0 60V | |
| Certificate | CE, cETLus, RoHS | |
| Specifications | Range | UT81B | |
| DMM Specifications | |||
| DC voltage (V) | 1000V | ±(0.8%+8) | |
| AC voltage (V) | 750V | ±(1%+15) | |
| DC current (A) | 10A | ±(1%+8) | |
| AC current (A) | 10A | ±(1.5%+8) | |
| Resistance (Ω) | 40MΩ | ±(1%+5) | |
| Capacitance (F) | 100μF | ±(3%+8) | |
| Frequency (Hz) | 10Hz~10MHz | ±(0.1%+3) | |
| Scope Specifications | |||
| Bandwidth | 8MHz | ||
| Sampling rate | 40MS/s | ||
| Vertical accuracy | ±(5%+1) | ||
| Vertical sensitivity | 20mV/div~500V/div (1-2-5) | √ | |
| Time-base accuracy | ±(0.01%+1) | ||
| Time-base range | UT81B: 100ns/div -5s/div (1-2-5) UT81C: 50ns/div – 5s/div(1-2-5) |
||
| Features | |||
| Display count | 4000 | ||
| Auto range | √ | ||
| Duty cycle | 0.1~99.9% | √ | |
| Diode | √ | ||
| Auto power off | √ | ||
| Continuity buzzer | √ | ||
| Display | 160 x 160 monochrome | √ | |
| Trigger types | Auto run/Normal/Single shot | √ | |
| Memory | 10 screens and setups | √ | |
| Contrast and brightness setup | √ | ||
| Low battery indication | √ | ||
| USB interface | √ | ||
| LCD backlight | √ | ||
| Input impedance for DCV | Around 10MΩ | √ | |
| General Characteristics | |||
| Power | 1.5V battery (R6) x 4 | ||
| Display | 60mm x 60mm | ||
| Product color | Red and grey | ||
| Product net weight | 498g | ||
| Product size | 200mm x 100mm x 48mm | ||
| Standard accessories | Batteries, test lead, alligator clip, USB interface cable, PC software CD | ||
| Standard individual packing | Gift box, English manual | ||
| Standard quantity per carton | 12pcs | ||
| Standard carton measurement | 485mm x 450mm x 260mm (0.057CBM per standard carton) | ||
| Standard carton gross weight | UT81B: 23kg; UT81C: 16.4kg | ||
| Optional accessories | Scope probe, AC power adaptor | ||
| Specifications | Range | UT81C | |
| DMM Specifications | |||
| DC voltage (V) | 1000V | ±(0.8%+8) | |
| AC voltage (V) | 750V | ±(1%+15) | |
| DC current (A) | 10A | ±(1%+8) | |
| AC current (A) | 10A | ±(1.5%+8) | |
| Resistance (Ω) | 40MΩ | ±(1%+5) | |
| Capacitance (F) | 100μF | ±(3%+8) | |
| Frequency (Hz) | 10Hz~10MHz | ±(0.1%+3) | |
| Scope Specifications | |||
| Bandwidth | 16MHz | ||
| Sampling rate | 80MS/s | ||
| Vertical accuracy | ±(5%+1) | ||
| Vertical sensitivity | 20mV/div~500V/div (1-2-5) | √ | |
| Time-base accuracy | ±(0.01%+1) | ||
| Time-base range | UT81B: 100ns/div -5s/div (1-2-5) UT81C: 50ns/div – 5s/div(1-2-5) |
||
| Features | |||
| Display count | 4000 | ||
| Auto range | √ | ||
| Duty cycle | 0.1~99.9% | √ | |
| Diode | √ | ||
| Auto power off | √ | ||
| Continuity buzzer | √ | ||
| Display | 160 x 160 monochrome | √ | |
| Trigger types | Auto run/Normal/Single shot | √ | |
| Memory | 10 screens and setups | √ | |
| Contrast and brightness setup | √ | ||
| Low battery indication | √ | ||
| USB interface | √ | ||
| LCD backlight | √ | ||
| Input impedance for DCV | Around 10MΩ | √ | |
| General Characteristics | |||
| Power | 1.5V battery (R6) x 4 | ||
| Display | 60mm x 60mm | ||
| Product color | Red and grey | ||
| Product net weight | 498g | ||
| Product size | 200mm x 100mm x 48mm | ||
| Standard accessories | Batteries, test lead, alligator clip, USB interface cable, PC software CD | ||
| Standard individual packing | Gift box, English manual | ||
| Standard quantity per carton | 12pcs | ||
| Standard carton measurement | 485mm x 450mm x 260mm (0.057CBM per standard carton) | ||
| Standard carton gross weight | UT81B: 23kg; UT81C: 16.4kg | ||
| Optional accessories | Scope probe, AC power adaptor | ||
| Specifications | Range | UT892 |
| DC voltage (V) | 6.000V/60.00V/600.0V/1000V/2000V | ±(0.5%+3) |
| AC voltage (V) | 6.000V/60.00V/600.0V/1000V/2000V | ±(1.0%+3) |
| Variable frequency voltage (VFC) | 600V | ±(5%) |
| Frequency (Hz) | 10Hz~10kHz | ±(0.5%+2) |
| Resistance (Ω) | 600.0Ω/6.000kΩ/60.00kΩ/6.000MΩ/60.00MΩ | ±(0.5%+5) |
| Capacitance (F) | 60.00nF/600.0nF~600.0μF/6000μF/60mF | ±(3.0%+10) |
| Features | ||
| Display counts | 6000 | |
| Auto/manual range | √ | |
| NCV | √ | |
| LIVE test | √ | |
| Diode | √ | |
| Continuity | √ | |
| Low battery indication | ≤ Approximately 2.5V | √ |
| Data hold | √ | |
| Max/Min | √ | |
| Relative mode | √ | |
| Auto power off | Approximately 15 minutes | √ |
| Backlight | √ | |
| Safety rating | CAT II 1000V/CAT III 600V | √ |
| General Characteristics | ||
| Power | AA 1.5V x2 | |
| Product color | Red+Gray | |
| Product net weight | 350g (Including batteries) | |
| Product size | 187*88*56mm | |
| Standard accessories | English manual, test leads, batteries. | |
| Standard individual packing | Gift box | |
| Standard quantity per carton | 40 pcs | |
| Standard carton measurement | 645×450×350mm | |
Heavy Duty Thermal Camera
UTi260B is a featured product of UNI-T heavy duty series thermal cameras. It is cost effective and with a wide temperature range: -20℃~550℃. It has higher IR resolution: 256×192 pixels than other models, and includes 7 color palettes and four display modes: thermal, visual image, fusion, and picture in picture. It is also user friendly and rugged enough to pass IP65 and 2m drop test.
Features :
UTP1300 series are single-channel linear DC power supplies with low ripple/noise, overload protection and constant voltage/current features.
UTP3300 series are three-channel linear DC power supplies of adjustable dual-channel and fixed single-channel output, featuring tracking, constant voltage/current, series/parallel output, temperature-controlled cooling fan, and over-voltage/current protection.
UTP3300 series are three-channel linear DC power supplies of adjustable dual-channel and fixed single-channel output, featuring tracking, constant voltage/current, series/parallel output, temperature-controlled cooling fan, and over-voltage/current protection.
16 results