৳ 850.00 ৳ 750.00
ReArm Rust Remover is very effective product for removing mill scale and rust

MYK ReArm Rust Remover

MYK ReArm Rust Remover
Single Component Derusting Solutions
ReArm Rust Remover is very effective product for removing mill scale and rust, besides removing thin films of oil and grease ReArm Rust Remover is formulate dosing phosphoric acids and other chemicals.ReArm Rust Remover removes thin films of oil / grease from steel surfaces. Removes mill scale, rust and welding scales.ReArm Rust Remover commands itself to you on many grounds-efficiency, economy, and inventory savings in need of water.
One bars during repairs to there in forced concrete structure Maintenance of mild steel structures like tanks water pipelines shuttering plates and other corroded steel surfaces.

Good surface preparation will help the rust converter work more effectively. This step isn’t always necessary, but the quality of the preparation leads to a high-quality end result. Remove excess rust with a stiff, bristled brush.The object of this step is to get any loose or flaking rust off rather than trying to seal it in. Clean and degrease the surface and let it dry. This step ensures that other surface contaminants will not interfere with the reaction of the rust converter on the rusted surface.If your surfaces have only thin films of/grease, you will find it advisable to switch over to ReArm Rust Remover which will perform both the functions of degreasing and dedusting thereby reducing one operation, two tanks, and space
In case of heavy rust steel reinforcement remove the loose rust by wire brushing, hammering, chipping, or grinding so that majority of the rust scale is removed Apply.the ReArm Rust Remover on to the affected areas by waste Clotho brush leave the surface to react for at least 15 to30Minutes the rusty surface will change its color to its original blackish steel.Then remove the loose particles of rust by brush or cloth When applied over corroded reinforced steel, clean the surface with fresh water before taking upshifter work of repairs.
Generally, about 20 minutes (Naturally the duration of dip for removing loosely adhering rust and scale will be less than that taken to remove heavier types of scale rust etc.) (For Testing method refer Terminology – T2)
Appearance: Yellowish colour liquidSpecific gravity@ 27ºC: 1.28 gm /ccpH @ 27ºC: Approx 2Concentration: 25 litersforevery100ltrsof working volume. (The exact amount of water to be added to ReArm Rust Remover should be arrived at by the Customer by experimenter as a small scale)Free acidity points: 28 – 32 pointsIron content tolerated: Below 1.5%Operating Temperature: Ambient
It is applied in multiple coats which depend on the surface condition. Number coats to be applied until the desired results are obtained.
1, 5 & 20 lit pack
Store in cool dry place
36 months from date of manufacturingLegal Note:
The information, and, in particular, the recommendations relating to the application and end-use of MYK Arment products, are given in good faith based on MYK Arment current knowledge and experience of the products when properly stored, handled and applied under normal conditions in accordance with MYK Arment’s recommendations. In practice, the difference in materials, substrates and actual site conditions are such that no warranty in respect of merchant ability or of fitness for a particular purpose, nor any liability arising out of any legal relationship whatsoever, can be inferred either from this information, or from any written recommendations, or from any other advice offered.Facebook Page visit
|
|
|
0% |
|
|
|
0% |
|
|
|
0% |
|
|
|
0% |
|
|
|
0% |
Electric Concrete Vibrator
Specifications
Vibrator Motor: 380v/2.2KW/3HP/50HZ Copper wire/Blue
Brand: ATCO/Merkode/Equivalent
Electric Concrete Vibrator
Specifications
Vibrator Motor: 220v/2.2KW/3HP/50HZ Copper wire/Blue
Brand: ATCO/Merkode/Equivalent
Electric Concrete Vibrator
Specifications
Vibrator Motor: 380v/2.20KW/3HP/50HZ Copper wire/Silver Color/with Chassis
Brand: ATCO/Merkode/Equivalent
7.5KW Petrol Generator SH8500ES – A High Power and Heavy-Duty Generator for Home, Corporate, Commercial, or Industrial Use.
Oil Drum Pump Barrel Pump Chemical Rotary Hand Pump Manual Barrel Pump for Transferring, Suction, or Dispensing Small Volumes of Liquid, Heavy Fuel Oil A, Kerosene, Diesel, Water, Wine, Alcohol, etc.
About this item
Different Size Industrial Exhaust Fan For Ventilator
1000% Quality full and Original Product we Deliver to You.
Electric Concrete Vibrator
Specifications
Vibrator Motor: 380v/3.0KW/4HP/50HZ Copper wire/Silver Color
Brand: ATCO/Merkode/Equivalent
| Safe Working Load (SWL) | 364kgs |
| Unit Weight | 50kgs |
| Drum Size | 210 Litres |
Reviews
There are no reviews yet.