Total 2000W Heat Gun with Adjustable Temperature (Model: TB20045)

Description

The Total TB20045 heat gun is a 2000W corded model for workshop and factory use. A rotary dial at the back lets you fine-tune temperature within each mode, rather than working with fixed steps.

It has three modes: 50°C cool air for drying and cooling, up to 450°C for plastic and heat-shrink, and up to 550°C for paint and PVC. Because it runs on mains power, it keeps going all day without a battery.

TB20045 heat gun specifications

What comes with the TB20045 heat gun

• 1 × reduction nozzle
• 1 × reflector nozzle
• 1 × flat nozzle
• 1 × scraper
• Packed in colour box

What it is used for

• Fitting heat-shrink tubing on cable joints
• Removing old paint and varnish
• Bending and welding PVC and plastic
• Loosening stickers, glue and rusted nuts
• Car wrap and shrink-wrap packing

Compare

Need a digital readout and up to 600°C? See the TB20056 with LCD. For a simple, lower-cost model, see the TB20078.

How to use it safely

First, choose the right nozzle for the job. Then start on low heat and raise it slowly, because too much heat can burn paint or melt plastic. Also, keep the nozzle moving and hold it a few centimetres from the surface. After use, stand the gun upright and let it cool before you pack it away. Finally, work in open air when you strip old paint, since the fumes can be harmful.

Why buy the TB20045 heat gun from Dusk Technology

Magnet Engineering supplies original TOTAL tools to workshops, factories and home users. For bulk or factory orders, call us first for a quotation.

Order the TB20045 heat gun from Dusk Technology today, or browse all models in our heat gun category.