-
Sanwa CD800a Digital Multimeters ৳ 4.50Add to cart
- 4000 counts
- Best accuracy 0.7％
- Auto power off(30min.)(cancelable)
- Low power ohm(input voltage 0.4V)at continuity range
- Solid & portective body cover that can also be used as a tilt stand
- Chip resister holder behind the body cover
-
Sanwa CD800a3 Digital Multimeters ৳ 6.00Add to cart
- 6000 count
- True RMS
- 0.7 best accuracy (DCmV)
- Max/Min value hold
- Data hold, Range hold, Relative function
- EF (Electric Field) sensing
- Auto power off (30min.)(cancelable)
- Body cover for protection and as a tilt stand
- Back light
- Chip holder behind the body cover
-
Sanwa DCL-1000 Clamp Meter ৳ 12.00Add to cart
- Lightweight approx. 290g
- Large LCD
- Easy to use large size data hold button
-
Sanwa DCM-301 Clamp Meter ৳ 8.00Add to cart
- The CT shape makes it easier to clamp cable in crowded.
- An electric field (EF) function is incorporated in the tip of the CT to enable detection of about AC 90V or more.
- Large, easy-to -press HOLD button.
- Equipped with LED light to illuminate the measurement target.
-
Sanwa ENC-3 Tachometer Attachment ৳ 8.00Add to cart
- Set of contact adapter, contact marker, rim speed ring (circumference: 100mm)
-
Sanwa KS-1 Contact-type 3 Phase Detector ৳ 6.00Add to cart
Contact-type 3 phase detector
- Phase sequence and open phase check
- Large size alligator clips
-
Sanwa LX20 Laser Power Meter/Environmental Meter ৳ 17.00Add to cart
Stick-shaped small light sensor (window diameter 9 mm) for narrow position or area
- Easy-to-carry pocket size.
- Separate, stick-shaped light sensor (window diameter 9 mm) from the main body enables measurement of a narrow position or area. The light sensor can also be integrated with the main body for measurement.
- 4039 full-scale count with a bar graph display.
- Improved measurement accuracy by using a silicon photodiode, which has a spectral sensitivity approximating the relative luminous efficiency specified by CIE (Commission Internationale d’Eclairage), in the light sensor.
- Wide measuring range of 0.1 lx to 403.9 klx (403,900 lx).
- Data hold function.
- Auto power save function prevents wasting of battery power.
-
Sanwa MG-1000 Insulation Tester ৳ 20.00Add to cart
Automatic determination of the live state of the measurement line
- Hot-line state(30V minimum) detection
- Large volt mark with the buzzer sound
- Automatic data hold function
- Bar graph just like analog meter
- Large display with backlight
- Easy to use & tough body
- IP54
- Continuity test(200mA) function
-
Sanwa PDR-4000 Earth Tester ৳ 20.00Add to cart
Easy to read with backlight
- hree measurement ranges: 40Ω, 400Ω, 4000Ω
- 3-pole/2-pole earth resistance measurement
(Optional accessory TL-68 is necessary for 2-pole measurement.) - Auto power off (10 min./Cancelable)
- Capable of measuring interference voltage
- 2mA measuring current
-
Sanwa PM3 Digital Multimeter ৳ 4.00Add to cart
8.5mm thick body with multi-function
- 4000 counts
- Best accuracy 0.7%
- Auto power off(15min.)(cancelable)
-
Sanwa SE300 Digital Laser Tachometer ৳ 32.00Add to cart
- Designed in pursuit of the ease of holding to enable stable measurement
- Long detection distance in non-contact measurement (max. approx.50 cm), enabling measurement from a distance from the rotating object
- Auto power OFF function (approx. 2 min., cancellation possible) and Bright backlight
- MAX/MIN display function
- Fixed installation is possible using a commercially available camera tripod
-
Sanwa YX360TRF Analog Multitester ৳ 4.00Add to cart
- Drop shock proof meter
- Null(zero center) meter ±5 / ±25 in DCV
- High resistance up to 200MΩ with low voltage
- Protective body cover
- Capacitance, dB, Li measurement
-
Smart Sensor AR63B Vibration Meter ৳ 16.00Add to cart
FEATURES
Vibration meter(also called vibration severity) uses Piezoelectric Acceleration Transducer transfer the vibration signal in to electrical signal, analyze the input signals, and show the Acceleration, speed, shift of the vibration. It is widely used in the lines of Power, petrochemical, machinery manufacturing, metallurgy, vehicles, etc.
-
Smart Sensor AR807 Humidity Temperature Meter ৳ 600.00Add to cart
FEATURES
Temperature Humidity Meter is an instrument used for measuring the moisture content in the atmosphere. Humidity measurement instruments usually rely on measurements of some other quantity such as temperature, pressure, mass or a mechanical or electrical change in a substance as moisture is absorbed. By calibration and calculation, these measured quantities can lead to a measurement of humidity. Modern electronic devices use changes in electrical capacitance or resistance to measure humidity differences.
-
Smart Sensor AR813A Lux Meter ৳ 2.20Add to cart
FEATURES
Lux meter is widely used in electro-optical sources, research teaching, metallurgy building, industry inspection as well as agriculture researching and illumination control.
-
Smart Sensor AR8200 Carbon Dioxide Detector ৳ 22.00Add to cart
FEATURES
A gas detector is a device that detects the presence of gases in an area, often as part of a safety system. This type of equipment is used to detect a gas leak and interface with a control system so a process can be automatically shut down. A gas detector can sound an alarm to operators in the area where the leak is occurring, giving them the opportunity to leave. This type of device is important because there are many gases that can be harmful to organic life.
Gas detectors can be used to detect combustible, flammable and toxic gases, and oxygen depletion, etc. This type of device is widely used in industry and can be found in locations, such as on oil rigs, to monitor manufacture processes and emerging technologies such as photovoltaic. They may also be used in firefighting.
16 results
