3M 6800 Reusable Full Face Respirator Mask is a medium-size reusable full-face respirator designed for industrial and occupational respiratory protection. It features a large polycarbonate lens for a wide field of view, a comfortable face seal, four-point strap suspension and a 3M bayonet connection system.

When used with the appropriate compatible 3M filters or cartridges, the 6800 can help protect against certain gases, vapors and particulate hazards. Compatible 3M filter and cartridge options include 2000, 5000, 6000 and 7000 series products, depending on the required protection.

Important: Protection depends on selecting the correct filter/cartridge and proper fit. A fit test and correct use according to the manufacturer’s instructions are important.

Key features

Reusable, low maintenance respirator
Lightweight, well-balanced with soft silicone faceseal ensures
comfort during long periods of work
Flexible System (gas and vapour and/or particulate filters plus
certain powered and supplied air options)
Twin filter design
3 sizes (small – 6700, medium – 6800, large – 6900)
Spectacle Kit available
Face piece weight: 400 grams

Nominal Protection Factors offered by the
3M™ Full Face Respirator 6000 Series
3M™ Full Face Respirator 6000 Series Nominal Protection Factor*
P1 Particulate Filters 5
P2 Particulate Filters 15
P3 Particulate Filters 1000
Class 1 Gas & Vapour Filters 2000 or 1000ppm
(Whichever is lower)
Class 2 Gas & Vapour Filters 2000 or 5000ppm
(Whichever is lower)

3M™ Versaflo™ Powered Air Respirator
TR-602E/TR-802E 2000
3M™ S-200+ Supplied Air Unit See S-200+ Datasheet
*Nominal Protection Factor (NPF) – a number derived from the maximum percentage of total
inward leakage permitted in relevant European Standards for a given class of respiratory
protective. This may not be the level of respiratory protection that can be realistically
expected in the workplace by wearers.
Many countries apply Assigned Protection Factors (APFs). For example: German APFs
range from 30 to 400 and UK APFs range from 10 to 40 depending on the product type and
classification. Employers may apply a value lower than the NPF/APF if deemed applicable.
Please refer to EN 529:2005 and National workplace protection guidance for application of
these numbers in the workplace.
Please contact 3M for further information.
Standards and approvals
These products have been tested to the relevant European Standards:
3M™ Full Face Respirator 6000 Series to EN 136:1998 Class 1. EN
12942:1998 + A2:2008 and EN 14594:2005 (with approved air
delivery units). Relevant performance requirements of EN 166: 2001
(Eye Protection – Protection against high speed particles, medium
energy). These products are in conformity with European regulation
and UK regulations and/or Directives
The Certificates and Declarations of Conformity available at the
following website: www.3M.com\Respiratory\certs