Fluke 62 Max+ Infrared Thermometer
৳ 20.00
-
Key Features
- Extremely rugged – 3-meter drop tested, IP54 for dust and moisture
- Precise dual-lasers for more accurate, repeatable measurements
- Provides up to a 12:1 Distance to spot ratio
... people are viewing this right now
Description
The Fluke 62 MAX+ Handheld Infrared Laser Thermometer delivers the accuracy you need in an extremely rugged package. Just point, shoot, and read the temperature of many types of equipment. Get accurate readings form transformers, motors, pumps, panels, breakers, compressors, duct, steam lines, valves, and vents.
Easy to use
The IR thermometer’s small size and versatile features make it extremely easy to use. Plus, the lightweight form factor clips comfortably to your tool belt or belt loop, or easily fits in your toolbox. The 62 MAX+ offers a wide variety of features to take measurements quickly:
- High and low alarms for rapid detection of measurements outside the limits
- Displays Min/Max/Avg/Dif
- The minimum, maximum or average temperature, or the difference between two measurements
- Easy to read, even in dark areas with large, backlit display
Works every place you need to go
The 62 MAX+ is rugged enough to take a three-meter drop – good news if you work from a ladder. Dual lasers help you target your measurement; the 12:1 distance to spot ratio helps get the reading you want. With its IP54 rating for dust and water resistance you can rely the Fluke 62 MAX+ to provide extremely accurate temperature measurements, rain or shine, even in dirty and dusty industrial sites.
Powered by a single, standard AA battery.
Related Products
13 KMK8 BRIDGE TDR
৳ 0.00
Add to cart
Key Features: Megger EZ THUMP V2 12 kV HIGHLY PORTABLE FAULT LOCATION SYSTEM
- Compact, light and rugged field instruments
- Battery and AC line operation
- Automatic end-of-cable and fault locating
- 4-kV or 12-kV output versions available
- Transflective colour display
- ARM® Prelocation
- Fault Pinpointing (Thumping)
- Optional Sectionalising Software*
26 Det14c And Det24c Earth Resistance Clamp Testers
৳ 0.00
Add to cart
Det14c and Det24c Earth Resistance Clamp Testers the most advanced megger Clamp Testers that you can depend on.
The DET14C and DET24C represent a new generation of earth/ground clamp-on resistance testers. These instruments induce a test current into earth systems and measure ground resistance in multi ground installations without needing to disconnect the ground. They offer market-leading access, advanced features, simple operation and CAT IV 600 V safety protection.
The elliptical shaped head design offers improved access to cables and earth straps in space-constrained locations. The clamp head accommodates up to 37 mm diameter cable and 50 mm earth tapes making them suitable for use in power stations, substations, towers and many more facilities.
14 Megger Bite2 and Bite2p Battery Impedance Tester
৳ 0.00
Add to cart
Key Features: Megger EZ THUMP V2 12 kV HIGHLY PORTABLE FAULT LOCATION SYSTEM
- Compact, light and rugged field instruments
- Battery and AC line operation
- Automatic end-of-cable and fault locating
- 4-kV or 12-kV output versions available
- Transflective colour display
- ARM® Prelocation
- Fault Pinpointing (Thumping)
- Optional Sectionalising Software*
19 Fluke 376 True RMS AC/DC Clamp Meter
৳ 0.00
Add to cart
Key Features: Fluke 376 True-RMS Digital Multimeter
- Delivers accurate true-RMS AC current and voltage plus frequency, capacitance, resistance, continuity and diode measurements
- Provides the baseline multimeter features you need for troubleshooting and repairing electrical and electronic systems
- Increases productivity with manual and automatic ranging, Display Hold, Auto Hold, and Min/Max-average recording
25 Delta4000 Series 12 Kv Insulation Diagnostic System
৳ 0.00
Add to cart
Key Features: Megger EZ THUMP V2 12 kV HIGHLY PORTABLE FAULT LOCATION SYSTEM
- Compact, light and rugged field instruments
- Battery and AC line operation
- Automatic end-of-cable and fault locating
- 4-kV or 12-kV output versions available
- Transflective colour display
- ARM® Prelocation
- Fault Pinpointing (Thumping)
- Optional Sectionalising Software*
PORTABLE HIGH VOLTAGE TEST SET FOR D.C. TESTING OF CABLE
৳ 0.00
Add to cart
Key Features: Megger EZ THUMP V2 12 kV HIGHLY PORTABLE FAULT LOCATION SYSTEM
- Compact, light and rugged field instruments
- Battery and AC line operation
- Automatic end-of-cable and fault locating
- 4-kV or 12-kV output versions available
- Transflective colour display
- ARM® Prelocation
- Fault Pinpointing (Thumping)
- Optional Sectionalising Software*
27 DLRO10HD 10 A MICRO-OHMMETER WITH DUAL POWER DIAGNOSTICS
৳ 0.00
Add to cart
DUAL POWER DIAGNOSTICS
09 Megger Fault Sniffer CABLE FAULT PINPOINTING
৳ 0.00
Add to cart
Key Features: Megger TDR2050 TWO CHANNEL CABLE FAULT LOCATOR
- CAT IV 600 V input protection
- IP54 rating offers real life working
- AUTO set up mode for instant, easy use
- AutoFind and FindEnd functions helps find the fault fast
- Trace tagging facility that allows a name to be saved with the trace
- Distance dependent gain to counteract signal attenuation
- Step function to improve detection of near end faults
17 Fluke 319 Clamp Meters
৳ 0.00
Add to cart
Key Features: Fluke 175 True-RMS Digital Multimeter
- Delivers accurate true-RMS AC current and voltage plus frequency, capacitance, resistance, continuity and diode measurements
- Provides the baseline multimeter features you need for troubleshooting and repairing electrical and electronic systems
- Increases productivity with manual and automatic ranging, Display Hold, Auto Hold, and Min/Max-average recording
Reviews
There are no reviews yet.