Fosroc Lokfix S

Fosroc Limited. One of its products is Lokfix S (Polyester resin grouts). Dusk Technology from Bangladesh is now known as a seller among all types of Fosroc products. One of the products of Fosroc is Lokfix S (Polyester resin grouts). If you want to check the price list, then Dusk Technology will be a reliable place for you.Among the online markets in Bangladesh, Dusk Technology has been approved by Fosroc as a seller. You can easily purchase all types of chemical products from Fosroc from Dusk Technology. Dusk Technology is providing free delivery within Dhaka. Order online with free delivery or call us at 01716603115 or email [email protected] . You can order retail and bulk from Dusk Technology.

Products Details of Fosroc Lokfix S

Fosroc Lokfix S is a two-component polyester resin anchoring grout.

Uses:

Lokfix S are used for high strength corrosion resistant anchoring of bolts and bars from 10 – 51mm diameter into concrete, rock, masonry or brickwork where high speed of installation and early application of load is required.Permanent installation of reinforcement starter bars, foundation bolts, base plates, balustrading, barriers and safety fences, railway tracks, tie-back anchors, reinforcement dowelling abut ments, ground anchors for towers, cranes, dock sills.

Advantages:

• • Rapid strength gain
  • Vibration resistant
  • Corrosion resistant
  • Non expansive
  • Can be placed under water

Standards and specifications:

Materials tested in accordance with

BS 4551
BS 5080
BS 2782

Description:

The three versions of Fosroc Lokfix S polyester resin grout are all pre
measured, two part, filled polyster resin grouts. After harden
ing the grout produces anchorages of consistent reproducible
values.

The versions are :

Fosroc Lokfix L (Large aggregate)
Fosroc Lokfix S (Small aggregate)
Fosroc Lokfix P (Pumpable grade)

Fosroc Lokfix S Price in Bangladesh

1. Fosroc Lokfix S is used where the difference between the hole diameter and bar diameter is < 25mm.
2. Fosroc Lokfix L is used where hole diameter exceeds bar diameter by 25 to 50mm.
3. Fosroc Lokfix P is used in overhead or horizontal holes where bar / hole relationship conforms to Lokfix S polyester resin grout. The thixotropic nature of Lokfix polyester resin grout P reduces flow of grout out of the hole.

Properties:

Specific gravity:

• • Lokfix ‘S’ : 1.9 g/cc
  • Lokfix ‘P’ : 2.9 g/cc

Design criteria:

The version of Fosroc Lokfix S grout to be used will depend upon ambient temperature and anchor conditions. The high strength of the cured resin permits strong anchors to be created. The ultimate bond strength developed depends upon:Strength of host material
Length of resin bond to bar
Hole preparation and formation
Type and dimension of barThe following formula may be used to determine the minimum depth of installation for Type 1 rebar bolts, to ensure the shear stress within the concrete is kept within the limits set out in BS 8110.

Application instructions:

Selection of grout version:

The version of Lokfix S chosen will depend on anchor conditions ( see description)

Parameters of anchor design

Fosroc Lokfix S the high strength of the cured resin permits strong anchors to be created.

Ultimate strength is determined by:

• • Strength of host material
  • Length of resin bond to bar
  • Hole preparation and formation
  • Type and dimension of bar

Mixing:

A complete pack of resin and catalyzed filler should be mixed in one operation. Mixing may be carried out mechanically. When a smooth, even consistency is achieved the grout is ready for use and should be placed well within the gel time of the grout (See properties).Packs have been designed to produce practical and economic volumes of grout. Do not attempt to mix partial pack components.Fosroc Lokfix S Price in Bangladesh

Estimating
Packaging

Lokfix S/P: 0.5 and 2.5 L Packs

Storage

Fosroc Lokfix SThe product should be stored away from high temperature.6 months shelf life when stored below 250C in original unopened containers.

Precautions

Fire resistance and creep

At operating temperatures above 400C, the creep of Fosroc Lokfix S polyester resin grout resin under load may become significant. Resin anchors should not be used where structural load bear ing performance has to be maintained in anchors subjected to fire conditions.

Flash point

Lokfix S,L,           P 290C
Nitoflor Sol          330C

Fire

Fosroc Lokfix S polyester resin grout resin is flammable. Confined areas must be well ventilated, and no naked flames allowed. Do not smoke during use.