HIT-RE 500 V3 – High-Performance Epoxy Anchor

Discover HIT-RE 500 V3 epoxy anchor – top-tier injectable adhesive for heavy-duty concrete anchoring. ICC-ES approved, high bond strength, and seismic rated.

Product Description

HIT-RE 500 V3 is the latest generation of high-performance injectable epoxy anchor systems from Hilti. Engineered for ultimate performance, this versatile epoxy anchor is designed for post-installed rebar connections, threaded rods, and structural steel anchoring in both cracked and uncracked concrete.

HIT-RE 500 V3 delivers exceptional load-bearing capacity, even in seismic zones, wet or water-filled holes, and deep embedment applications. With approvals such as ICC-ES (AC308) and ETA for rebar and anchor rod applications, this adhesive is trusted globally for demanding construction projects.

Features and Benefits

• Superior Load Performance: Offers the highest bond strength in Hilti’s adhesive range. Suitable for heavy-duty anchoring.

• ICC-ES Approved: Compliant with AC308 and AC133 for seismic performance (Categories A-F).

• Long Working Time: Ideal for hot weather conditions and deep embedment installations.

• Moisture-Tolerant: Performs well in wet concrete, water-filled or diamond-drilled holes.

• Versatile Compatibility: Works with rebar, threaded rods, and other structural steel components.

• Fire-Resistance: Certified with up to 120 minutes of fire exposure under ISO 834 standard.

• Rebar Doweling: Approved for post-installed rebar connections in load-bearing elements.

• Extended Shelf Life: Up to 24 months in proper storage conditions (below 25°C / 77°F).

Applications

HIT-RE 500 V3 epoxy anchor is widely used in:

• Structural Steel Connections

• Concrete Column & Beam Retrofitting

• Heavy Equipment & Machine Base Anchoring

• Facade & Curtain Wall Installation

• Post-installed Rebar for Slabs, Beams, Columns, and Shear Walls

• Infrastructure Projects (Bridges, Tunnels, Dams)

• Seismic Retrofitting Projects (Zones A-F)

Technical Data

Approvals and Certifications

• ICC-ES Report ESR-3814 – Adhesive anchor for threaded rod and rebar in concrete (AC308, ACI 318).

• ETA-16/0142 – European Technical Approval for post-installed rebar and anchor rod.

• Seismic Category C2 – Safe for use in seismic zones with dynamic loading.

• LEED & Green Building Compliant – Low VOC content; meets environmental standards.

• Fire Rated – Up to R120 fire performance (EN 1363-1).

Installation Instructions

1. Drill: Use hammer or diamond drill bit to achieve specified diameter and depth.

2. Clean: Clean the hole thoroughly using brush-blow-brush-blow method.

3. Inject: Dispense HIT-RE 500 V3 using the proper dispenser and static mixer nozzle. Discard first 3–4 inches of mixed resin.

4. Insert Anchor: Slowly insert rebar/threaded rod while rotating for even distribution.

5. Cure: Allow to cure as per temperature conditions (refer to curing time chart).

6. Inspect & Load: Once cured, anchor is ready to bear full design loads.

Tip: Always refer to the Hilti PROFIS Anchor Software or relevant design guidelines for precise calculations and installation depth.

Design Considerations

• Anchoring design in compliance with ACI 318, EN 1992-4, TR069.

• Use Hilti PROFIS Engineering Suite for calculating tension, shear, edge distances, and spacing.

• Allow extra curing time in wet, cold, or sub-zero conditions.

• Verify base material condition (cracked/uncracked) before design.

Storage & Handling

• Store between +5°C and +25°C in a dry location.

• Keep away from direct sunlight and heat sources.

• Partially used cartridges must be reused with a new static mixer.

Health and Safety

• Use appropriate PPE (gloves, safety glasses, mask) during installation.

• Avoid direct skin contact with resin or hardener.

• Refer to Safety Data Sheet (SDS) for complete health & environmental information.

Why Choose HIT-RE 500 V3?

HIT-RE 500 V3 isn’t just another epoxy anchor—it’s engineered for critical, high-load applications where safety, strength, and performance matter most. Whether it’s a commercial high-rise, infrastructure bridge, or seismic retrofit, HIT-RE 500 V3 stands up to the challenge with proven performance, global certifications, and user-friendly installation.

Build with Confidence – Build with HIT-RE 500 V3.

Facebook Page visit