Kyoritsu Kew 4200 Earth Clamp Meter
৳ 130.00
- The earth resistance from 0.05 to 1500Ω can be measured without the auxiliary earth spikes in multi-earthing systems
- True RMS leakage or phase current readings from 0.1mA to 30.0A provides vital additional information in earthing networks
- Filter function offers increased immunity to electrical noise and a Noise mark appears in excessively high noisy environments
- Memory function up to 100 data
... people are viewing this right now
Description
Specification
| Earth resistance (Auto-ranging) | 20.00/200.0/1500Ω ±1.5%±0.05Ω(0.00 to 20.99Ω)*1 ±2%±0.5Ω(16.0 to 99.9Ω) ±3%±2Ω(100.0 to 209.9Ω) ±5%±5Ω(160 to 399Ω) ±10%±10Ω(400 to 599Ω) Values are displayed, but accuracy isn’t guaranted(600 to 1580Ω) |
|---|---|
| AC current (50/60Hz) (Auto-ranging) |
100.0/1000mA/10.00/30.0A ±2%±0.7mA(0.0 to 104.9mA) ±2%(80mA to 31.5A) |
| Operating indication | Earth resistance function : Constant voltage injection Current detection (Frequency : Approx.2400Hz) Dual Integration AC current function : Successive approximation |
| Over-range indication | “OL”is displayed when input exceeds the upper limit of a measuring range |
| Response time | Approx. 7 seconds (Earth resistance) Approx. 2 seconds (AC current) |
| Sample rate | Approx. 1 times per second |
| Current consumption | Approx. 50mA (max.100mA) |
| Measurement time | Approx.12 hours (when R6 is used) Approx.24 hours (when LR6 is used) |
| Auto power off | Turns power off about 10 minutes after the last button operation. |
| Conductor size | Approx. Ø32mm |
| Applicable standards | IEC 61010-1 CAT Ⅳ 300V Pollution degree2 IEC 61010-2-032, IEC 61326 (EMC) |
| Power source | LR6/R6 (AA)(1.5V) x 4 |
| Dimension | 246(L)×120(W)×54(D)mm |
| Weight | Approx. 780g (including batteries) |
| Accessories | 8304 (Resister for operation check) 9166 (Carrying case[Hard]) R6 x 4, Instruction manual |
Related Products
26 Det14c And Det24c Earth Resistance Clamp Testers
৳ 0.00
Add to cart
Det14c and Det24c Earth Resistance Clamp Testers the most advanced megger Clamp Testers that you can depend on.
The DET14C and DET24C represent a new generation of earth/ground clamp-on resistance testers. These instruments induce a test current into earth systems and measure ground resistance in multi ground installations without needing to disconnect the ground. They offer market-leading access, advanced features, simple operation and CAT IV 600 V safety protection.
The elliptical shaped head design offers improved access to cables and earth straps in space-constrained locations. The clamp head accommodates up to 37 mm diameter cable and 50 mm earth tapes making them suitable for use in power stations, substations, towers and many more facilities.
19 Fluke 376 True RMS AC/DC Clamp Meter
৳ 0.00
Add to cart
Key Features: Fluke 376 True-RMS Digital Multimeter
- Delivers accurate true-RMS AC current and voltage plus frequency, capacitance, resistance, continuity and diode measurements
- Provides the baseline multimeter features you need for troubleshooting and repairing electrical and electronic systems
- Increases productivity with manual and automatic ranging, Display Hold, Auto Hold, and Min/Max-average recording
Megger Torkel900 Battery Discharge Test System
৳ 0.00
Add to cart
Key Features: Megger EZ THUMP V2 12 kV HIGHLY PORTABLE FAULT LOCATION SYSTEM
- Compact, light and rugged field instruments
- Battery and AC line operation
- Automatic end-of-cable and fault locating
- 4-kV or 12-kV output versions available
- Transflective colour display
- ARM® Prelocation
- Fault Pinpointing (Thumping)
- Optional Sectionalising Software*
- Find in the resources file.
- Find in the resources file.
- Find in the resources file.
13 KMK8 BRIDGE TDR
৳ 0.00
Add to cart
Key Features: Megger EZ THUMP V2 12 kV HIGHLY PORTABLE FAULT LOCATION SYSTEM
- Compact, light and rugged field instruments
- Battery and AC line operation
- Automatic end-of-cable and fault locating
- 4-kV or 12-kV output versions available
- Transflective colour display
- ARM® Prelocation
- Fault Pinpointing (Thumping)
- Optional Sectionalising Software*
07 PHAZER WATTHOUR METER TEST AND CALIBRATION SYSTEM
৳ 0.00
Add to cart
Key Features: Megger EZ THUMP V2 12 kV HIGHLY PORTABLE FAULT LOCATION SYSTEM
- Compact, light and rugged field instruments
- Battery and AC line operation
- Automatic end-of-cable and fault locating
- 4-kV or 12-kV output versions available
- Transflective colour display
- ARM® Prelocation
- Fault Pinpointing (Thumping)
- Optional Sectionalising Software*
08 Megger EZ Restore Overdrive CABLE FAULT LOCATOR
৳ 0.00
Add to cart
Key Features: Megger EZ THUMP V2 12 kV HIGHLY PORTABLE FAULT LOCATION SYSTEM
- Compact, light and rugged field instruments
- Battery and AC line operation
- Automatic end-of-cable and fault locating
- 4-kV or 12-kV output versions available
- Transflective colour display
- ARM® Prelocation
- Fault Pinpointing (Thumping)
- Optional Sectionalising Software*
17 Fluke 319 Clamp Meters
৳ 0.00
Add to cart
Key Features: Fluke 175 True-RMS Digital Multimeter
- Delivers accurate true-RMS AC current and voltage plus frequency, capacitance, resistance, continuity and diode measurements
- Provides the baseline multimeter features you need for troubleshooting and repairing electrical and electronic systems
- Increases productivity with manual and automatic ranging, Display Hold, Auto Hold, and Min/Max-average recording
Phase Verification System
৳ 0.00
Add to cart
Key Features: Megger EZ THUMP V2 12 kV HIGHLY PORTABLE FAULT LOCATION SYSTEM
- Compact, light and rugged field instruments
- Battery and AC line operation
- Automatic end-of-cable and fault locating
- 4-kV or 12-kV output versions available
- Transflective colour display
- ARM® Prelocation
- Fault Pinpointing (Thumping)
- Optional Sectionalising Software*
- Please find in the resources file
- N/A
- N/A
09 Megger Fault Sniffer CABLE FAULT PINPOINTING
৳ 0.00
Add to cart
Key Features: Megger TDR2050 TWO CHANNEL CABLE FAULT LOCATOR
- CAT IV 600 V input protection
- IP54 rating offers real life working
- AUTO set up mode for instant, easy use
- AutoFind and FindEnd functions helps find the fault fast
- Trace tagging facility that allows a name to be saved with the trace
- Distance dependent gain to counteract signal attenuation
- Step function to improve detection of near end faults
14 Megger Bite2 and Bite2p Battery Impedance Tester
৳ 0.00
Add to cart
Key Features: Megger EZ THUMP V2 12 kV HIGHLY PORTABLE FAULT LOCATION SYSTEM
- Compact, light and rugged field instruments
- Battery and AC line operation
- Automatic end-of-cable and fault locating
- 4-kV or 12-kV output versions available
- Transflective colour display
- ARM® Prelocation
- Fault Pinpointing (Thumping)
- Optional Sectionalising Software*
Reviews
There are no reviews yet.