Schneider Electric SPD 65KA 350V 3P+N With Remote Transfert (A9L65601)

৳ 17,102.00

Schneider Electric Acti9 iPRD65r Type 2 surge protector with remote alarm contact, for three-phase boards and sensitive equipment.

65kA Imax, 20kA In, Up ≤ 1.5kV
3P+N, 350V AC, 50/60 Hz
Remote transfer contact for fault signalling
Plug-in replaceable cartridges, 4-module DIN rail
Genuine stock, delivery all over Bangladesh

... people are viewing this right now

Guaranteed Safe Checkout

Description

The Schneider Electric SPD 65KA 350V 3P+N With Remote Transfert (A9L65601) is a Type 2 surge protection device from the Acti9 iPRD65r range. It protects three-phase distribution boards and the equipment behind them from lightning and switching surges. A built-in remote transfer contact sends an alarm to your BMS, SCADA or a pilot lamp when a cartridge needs replacing, so no failed SPD goes unnoticed.

Why choose the A9L65601 SPD 65KA 350V 3P+N With Remote Transfert

65kA Imax, 20kA In (8/20 µs) per pole, for strong surges during the monsoon and thunderstorm season in Bangladesh.
Protection level Up ≤ 1.5kV, so PLCs, VFDs, UPS units, meters and IT equipment stay safe.
Remote transfer contact (1 C/O, 0.25A 250V AC) for remote fault monitoring.
Plug-in cartridges with a red/white status window. Replace a cartridge without rewiring the board.
Works with TT and TN-S earthing, the systems used in most Bangladeshi LT installations.

Technical specifications

Brand / Range	Schneider Electric / Acti9 iPRD65r
Part number (MPN)	A9L65601
Device type	Type 2 modular surge arrester (SPD), MOV + GDT
Poles	3P + N
Max. continuous operating voltage (Uc)	350V AC L/N and L/PE, 260V AC N/PE
Max. discharge current (Imax, 8/20 µs)	65kA (L/N, L/PE, N/PE)
Nominal discharge current (In, 8/20 µs)	20kA
Voltage protection level (Up)	≤ 1.5kV
Frequency	50/60 Hz
Earthing system	TT, TN-S
Remote transfer contact	Yes, 1 C/O, 0.25A / 250V AC
Connection	Tunnel terminals, 2.5 to 35 mm², 2.5 N.m
Dimensions (W x H x D)	72 x 85 x 69 mm (4 modules)
Weight	0.492 kg
Operating temperature	-25°C to +60°C
Standards	IEC 61643-11, EN 61643-11

Where to use it

Install this SPD in main LT panels and incomers, factories, power plants, telecom sites, high-rise buildings and any site with high lightning exposure. For sub-distribution boards with lower surge exposure, the SPD 40KA 3P+N (A9L40601). For single-phase boards, use the SPD 40KA 1P+N (A9L40500).

What is in the box

One A9L65601 base with plug-in cartridges for three phases and neutral, ready for 35mm DIN rail mounting.

Buy from Magnet Engineering

We supply genuine Schneider Electric stock with nationwide delivery across Bangladesh. Contractors, factories and panel builders can ask us for a bulk quotation. Browse all surge protection devices and other electrical items for your project.

Reviews (0)