-
UT61E Modern Digital Multimeter ৳ 8,700.00Add to cartUT61 series complies with CE, ETL, and GS standards. This series is all auto range with selectable True RMS models (UT61D/E). This series has an abundant of features and is combined with high safety rating of CAT IV 600V. It is suitable for advanced electronics and electrical users.
-
UT620B Digital Micro Ohm Meter ৳ 42,000.00Add to cart
UT620 series is used to measure DC low resistance through 4-wire method. Some of their features are Comparison function to determine if the device is in good condition, unknown wire length calculation (FT/M); two-way data transmission by USB interface; built-in rechargeable lithium battery.
Applications:UT620 can be used in narrow space for on-site troubleshooting, such as metal coating resistance/motor and small transformer winding resistance measurements, earth system joints/welding points/power distribution cabinet bus and lead connection inspections and more. -
UT658 USB Tester ৳ 2,500.00Add to cart
UT658 series USB testers are used to inspect USB chargers and portable power source of electronics products. UT658 series can output voltage, current, and power.
Applications:Users can use these devices to monitor charging status of any USB powered device. -
UT673PV Solar MPPT Meter Handheld Automatic Measurement Solar Detector UNI-T ৳ 14,500.00Add to cart
Specification
Max power measurement 5～800W ±(1.0%＋10) Max power current(DC) 0～35A ±(1.5%＋5) Max power voltage(DC) 12～60V ±(1.5%＋5) Open circuit current(DC) 12～60V ±(1.5%＋5) Short circuit current(DC) 0～35A ±(1.5%＋5) General Features Display Large LCD (52 * 66mm) Reverse polarity
connect Protection√ Over voltage protection √ Over current protection √ Over temperature protection √ Over power protection √ Manual/Auto MPPT test √ Data hold √ Power supply No battery needed, powered by solar panel Ovecategory CAT 0 60V Certificate CE, cETLus, RoHS -
UT81B Scope Digital Multimeter UNI-T ৳ 23,000.00Add to cart
Specifications
Specifications Range UT81B DMM Specifications DC voltage (V) 1000V ±(0.8%+8) AC voltage (V) 750V ±(1%+15) DC current (A) 10A ±(1%+8) AC current (A) 10A ±(1.5%+8) Resistance (Ω) 40MΩ ±(1%+5) Capacitance (F) 100μF ±(3%+8) Frequency (Hz) 10Hz~10MHz ±(0.1%+3) Scope Specifications Bandwidth 8MHz Sampling rate 40MS/s Vertical accuracy ±(5%+1) Vertical sensitivity 20mV/div~500V/div (1-2-5) √ Time-base accuracy ±(0.01%+1) Time-base range UT81B: 100ns/div -5s/div (1-2-5)
UT81C: 50ns/div – 5s/div(1-2-5)Features Display count 4000 Auto range √ Duty cycle 0.1~99.9% √ Diode √ Auto power off √ Continuity buzzer √ Display 160 x 160 monochrome √ Trigger types Auto run/Normal/Single shot √ Memory 10 screens and setups √ Contrast and brightness setup √ Low battery indication √ USB interface √ LCD backlight √ Input impedance for DCV Around 10MΩ √ General Characteristics Power 1.5V battery (R6) x 4 Display 60mm x 60mm Product color Red and grey Product net weight 498g Product size 200mm x 100mm x 48mm Standard accessories Batteries, test lead, alligator clip, USB interface cable, PC software CD Standard individual packing Gift box, English manual Standard quantity per carton 12pcs Standard carton measurement 485mm x 450mm x 260mm (0.057CBM per standard carton) Standard carton gross weight UT81B: 23kg; UT81C: 16.4kg Optional accessories Scope probe, AC power adaptor -
UT81C Series Scope Digital Multimeters UNI-T ৳ 31,000.00Add to cart
Specifications
Specifications Range UT81C DMM Specifications DC voltage (V) 1000V ±(0.8%+8) AC voltage (V) 750V ±(1%+15) DC current (A) 10A ±(1%+8) AC current (A) 10A ±(1.5%+8) Resistance (Ω) 40MΩ ±(1%+5) Capacitance (F) 100μF ±(3%+8) Frequency (Hz) 10Hz~10MHz ±(0.1%+3) Scope Specifications Bandwidth 16MHz Sampling rate 80MS/s Vertical accuracy ±(5%+1) Vertical sensitivity 20mV/div~500V/div (1-2-5) √ Time-base accuracy ±(0.01%+1) Time-base range UT81B: 100ns/div -5s/div (1-2-5)
UT81C: 50ns/div – 5s/div(1-2-5)Features Display count 4000 Auto range √ Duty cycle 0.1~99.9% √ Diode √ Auto power off √ Continuity buzzer √ Display 160 x 160 monochrome √ Trigger types Auto run/Normal/Single shot √ Memory 10 screens and setups √ Contrast and brightness setup √ Low battery indication √ USB interface √ LCD backlight √ Input impedance for DCV Around 10MΩ √ General Characteristics Power 1.5V battery (R6) x 4 Display 60mm x 60mm Product color Red and grey Product net weight 498g Product size 200mm x 100mm x 48mm Standard accessories Batteries, test lead, alligator clip, USB interface cable, PC software CD Standard individual packing Gift box, English manual Standard quantity per carton 12pcs Standard carton measurement 485mm x 450mm x 260mm (0.057CBM per standard carton) Standard carton gross weight UT81B: 23kg; UT81C: 16.4kg Optional accessories Scope probe, AC power adaptor -
UT892 2000V AC/DC High Voltage Digital Multimeter UNI-T ৳ 4,500.00Add to cart
Specifications
Specifications Range UT892 DC voltage (V) 6.000V/60.00V/600.0V/1000V/2000V ±(0.5%+3) AC voltage (V) 6.000V/60.00V/600.0V/1000V/2000V ±(1.0%+3) Variable frequency voltage (VFC) 600V ±(5%) Frequency (Hz) 10Hz~10kHz ±(0.5%+2) Resistance (Ω) 600.0Ω/6.000kΩ/60.00kΩ/6.000MΩ/60.00MΩ ±(0.5%+5) Capacitance (F) 60.00nF/600.0nF~600.0μF/6000μF/60mF ±(3.0%+10) Features Display counts 6000 Auto/manual range √ NCV √ LIVE test √ Diode √ Continuity √ Low battery indication ≤ Approximately 2.5V √ Data hold √ Max/Min √ Relative mode √ Auto power off Approximately 15 minutes √ Backlight √ Safety rating CAT II 1000V/CAT III 600V √ General Characteristics Power AA 1.5V x2 Product color Red+Gray Product net weight 350g (Including batteries) Product size 187*88*56mm Standard accessories English manual, test leads, batteries. Standard individual packing Gift box Standard quantity per carton 40 pcs Standard carton measurement 645×450×350mm -
UTi260B Heavy Duty Thermal Camera ৳ 43,000.00Add to cart
Heavy Duty Thermal Camera
UTi260B is a featured product of UNI-T heavy duty series thermal cameras. It is cost effective and with a wide temperature range: -20℃~550℃. It has higher IR resolution: 256×192 pixels than other models, and includes 7 color palettes and four display modes: thermal, visual image, fusion, and picture in picture. It is also user friendly and rugged enough to pass IP65 and 2m drop test.
Features :
- Durable and user-friendly
- 2.8” TFT display screen (320×240 Pixels)
- IR resolution: 256×192
- Temperature measurement range: -20℃ to 550℃ / -4℉ to 1022 ℉
- Auto alarm for high/low temperature
- Auto tracking for hot spot/cold spot
- On screen analyzer: 3 Points
- Image capture
- Image modess: Thermal,Visual image,Fusion,PIP
- Digital camera resolution: 640×480
- Color palettes: 7(White hot, Black hot, Red hot Ironbow, Lava, Rainbow, Rainbow HC)
- LED flashlight
- PC software analysis and real-time image projection)
- Rechargeable Li-ion battery
- 1/4”Tripod Mounting Hole
- IP65
- 2m drop proof
-
UTP1305 DC Power Supplie ৳ 11,500.00Add to cart
UTP1300 series are single-channel linear DC power supplies with low ripple/noise, overload protection and constant voltage/current features.
Applications:Electronics design, battery charging, electrical vehicle, research labs and education sectors. -
UTP3303 DC Power Supplie ৳ 10,570.00Add to cart
UTP3300 series are three-channel linear DC power supplies of adjustable dual-channel and fixed single-channel output, featuring tracking, constant voltage/current, series/parallel output, temperature-controlled cooling fan, and over-voltage/current protection.
Applications:Electronics design, battery charging, electrical vehicle, research labs and education sectors. -
UTP3305 DC Power Supplie ৳ 32,000.00Add to cart
UTP3300 series are three-channel linear DC power supplies of adjustable dual-channel and fixed single-channel output, featuring tracking, constant voltage/current, series/parallel output, temperature-controlled cooling fan, and over-voltage/current protection.
Applications:Electronics design, battery charging, electrical vehicle, research labs and education sectors. -
UTP3313TFL DC Power Supply ৳ 10,500.00Add to cartUTP3300TFL series are economical single-channel linear DC power supplies with constant voltage/current feature.Applications:Electronics design, battery charging, electrical vehicle, research labs, and education sectors.
-
UTS1020 Handheld Spectrum Analyzer ৳ 483,000.00Add to cartUTS1000 series handheld spectrum analyzer is designed for field use. It is light in weight, with simple structure, rich measurement function, and it is the best choice for excellent performance and value. It is equipped with high-brightness 6.5-inch widescreen LCD display, dynamic appearance, and clear picture. High-capacity rechargeable lithium battery supports 4-hour continuous working. Push battery compartment help users replace battery conveniently at any time and thus extend runtime unlimitedly. Built-in trace source, standard preamplifier, audio demodulation and high-resolution bandwidth and other functions, can quickly and reliably solve a variety of conventional measurement tasks and adapt to complex environmental requirements. It uses a common USB, LAN communication interface to connect with PC and displays test screen on PC and achieves remote control. Using a standard complete SCPI command set, the integrated testing system can be built and upgraded quickly, which is convenient for users to use and measure.Applications:Designing, testing, troubleshooting, and repairing of electronic and electroacoustic devices, such as circuit and equipment testing in cellular and wireless systems, broadcasting, television and radio systems; semiconductor component testing etc.
-
UTS1030 Handheld Spectrum Analyzer ৳ 586,000.00Add to cartUTS1000 series handheld spectrum analyzer is designed for field use. It is light in weight, with simple structure, rich measurement function, and it is the best choice for excellent performance and value. It is equipped with high-brightness 6.5-inch widescreen LCD display, dynamic appearance, and clear picture. High-capacity rechargeable lithium battery supports 4-hour continuous working. Push battery compartment help users replace battery conveniently at any time and thus extend runtime unlimitedly. Built-in trace source, standard preamplifier, audio demodulation and high-resolution bandwidth and other functions, can quickly and reliably solve a variety of conventional measurement tasks and adapt to complex environmental requirements. It uses a common USB, LAN communication interface to connect with PC and displays test screen on PC and achieves remote control. Using a standard complete SCPI command set, the integrated testing system can be built and upgraded quickly, which is convenient for users to use and measure.Applications:Designing, testing, troubleshooting, and repairing of electronic and electroacoustic devices, such as circuit and equipment testing in cellular and wireless systems, broadcasting, television and radio systems; semiconductor component testing etc.
-
UVEX Safety Goggles ৳ 555.00Add to cart
-
General features
- Functional goggles in an appealing, modern design with a large field of vision for a wide range of applications
- Optimised lens design for edge-to-edge optical clarity and increased safety
- Optional faceguard provides additional facial protection — multi-stage locking and resting positions allow flexible handling during use
- A sustainable benefit: lenses can be replaced when required
- Metal-free
-
16 results
