Fluke 376 FC True-RMS Clamp Meter
৳ 46.00
- Measures AC/DC with included iFlex current probe
- VFD low-pass filter for accurate measurements of non-linear signals
- Remotely log, trend, and monitor to pinpoint intermittent faults
- Inrush measurement to filter out noise and capture the starting current
... people are viewing this right now
Description
The Fluke 376 FC True-rms Clamp Meter with iFlex is the most advanced troubleshooting tool for industrial and commercial electricians. The 376 is part of the Fluke Connect family of wireless test tools that enable you to log, trend, and monitor measurements while remaining safely away from the arc flash zone through Bluetooth connectivity.
Find the cause of difficult problems
The 376 FC clamp meter features an integrated low-pass filter, enabling accurate measurements of non-linear signals, including adjustable speed drives, electronic ballasts, and other non-linear loads. The clamp also utilizes proprietary inrush measurement technology to filter out noise and capture motor starting current precisely as the circuit protection detects it.
Measure:
- Voltage to 1000 V AC or DC
- Resistance to 60 kΩ with continuity detection
- Min, max, average, and inrush recording to capture variations automatically
- 500 mV DC measurement range to interface with other accessories
- 1000 μF capacitance measurement
Work safely and conveniently
The 376 FC clamp carries a CAT III 1000 V, CAT IV 600 V safety rating, designed to offer you the highest possible protection in a test tool.
The included iFlex flexible current probe provides easier access to large conductors in tight spaces. The flexible probe:
- Expands the measurement range to 2500 A AC
- Allows frequency measurement to 500 Hz with the body jaw and iFlex
Related Products
32 5730A High Performance Multifunction Calibrator
৳ 0.00
Add to cart
Fluke Pocket Thermal Camera
Key Features:
Get the infrared troubleshooting power you need.
- Automatically organize and file thermal images with Fluke Connect Asset Tagging
- Fully radiometric thermal imager gives you measurement data to the pixel with 120 x 90 infrared resolution (10,800 pixels)
- 5” LCD touchscreen display for easy troubleshooting
- -20 °C to +150 °C temperature measurement range
- Six color palettes
- Can withstand drop up to 1 meter
- IP 54 enclosure rating
07 PHAZER WATTHOUR METER TEST AND CALIBRATION SYSTEM
৳ 0.00
Add to cart
Key Features: Megger EZ THUMP V2 12 kV HIGHLY PORTABLE FAULT LOCATION SYSTEM
- Compact, light and rugged field instruments
- Battery and AC line operation
- Automatic end-of-cable and fault locating
- 4-kV or 12-kV output versions available
- Transflective colour display
- ARM® Prelocation
- Fault Pinpointing (Thumping)
- Optional Sectionalising Software*
08 Megger EZ Restore Overdrive CABLE FAULT LOCATOR
৳ 0.00
Add to cart
Key Features: Megger EZ THUMP V2 12 kV HIGHLY PORTABLE FAULT LOCATION SYSTEM
- Compact, light and rugged field instruments
- Battery and AC line operation
- Automatic end-of-cable and fault locating
- 4-kV or 12-kV output versions available
- Transflective colour display
- ARM® Prelocation
- Fault Pinpointing (Thumping)
- Optional Sectionalising Software*
16 Fluke 62 MAX Infrared Thermometers
৳ 0.00
Add to cart
Fluke PTi120 Pocket Thermal Camera
Key Features:
Get the infrared troubleshooting power you need.
- Automatically organize and file thermal images with Fluke Connect Asset Tagging
- Fully radiometric thermal imager gives you measurement data to the pixel with 120 x 90 infrared resolution (10,800 pixels)
- 5” LCD touchscreen display for easy troubleshooting
- -20 °C to +150 °C temperature measurement range
- Six color palettes
- Can withstand drop up to 1 meter
- IP 54 enclosure rating
19 Fluke 376 True RMS AC/DC Clamp Meter
৳ 0.00
Add to cart
Key Features: Fluke 376 True-RMS Digital Multimeter
- Delivers accurate true-RMS AC current and voltage plus frequency, capacitance, resistance, continuity and diode measurements
- Provides the baseline multimeter features you need for troubleshooting and repairing electrical and electronic systems
- Increases productivity with manual and automatic ranging, Display Hold, Auto Hold, and Min/Max-average recording
25 Delta4000 Series 12 Kv Insulation Diagnostic System
৳ 0.00
Add to cart
Key Features: Megger EZ THUMP V2 12 kV HIGHLY PORTABLE FAULT LOCATION SYSTEM
- Compact, light and rugged field instruments
- Battery and AC line operation
- Automatic end-of-cable and fault locating
- 4-kV or 12-kV output versions available
- Transflective colour display
- ARM® Prelocation
- Fault Pinpointing (Thumping)
- Optional Sectionalising Software*
20 Fluke 175 True-RMS Digital Multimeter
৳ 0.00
Add to cart
Key Features: Fluke 175 True-RMS Digital Multimeter
- Delivers accurate true-RMS AC current and voltage plus frequency, capacitance, resistance, continuity and diode measurements
- Provides the baseline multimeter features you need for troubleshooting and repairing electrical and electronic systems
- Increases productivity with manual and automatic ranging, Display Hold, Auto Hold, and Min/Max-average recording
14 Megger Bite2 and Bite2p Battery Impedance Tester
৳ 0.00
Add to cart
Key Features: Megger EZ THUMP V2 12 kV HIGHLY PORTABLE FAULT LOCATION SYSTEM
- Compact, light and rugged field instruments
- Battery and AC line operation
- Automatic end-of-cable and fault locating
- 4-kV or 12-kV output versions available
- Transflective colour display
- ARM® Prelocation
- Fault Pinpointing (Thumping)
- Optional Sectionalising Software*
18 Fluke Ti401 PRO Thermal scanner Camera
৳ 0.00
Add to cart
Fluke Ti401 Pocket Thermal Camera
Key Features:
Get the infrared troubleshooting power you need.
- Automatically organize and file thermal images with Fluke Connect Asset Tagging
- Fully radiometric thermal imager gives you measurement data to the pixel with 120 x 90 infrared resolution (10,800 pixels)
- 5” LCD touchscreen display for easy troubleshooting
- -20 °C to +150 °C temperature measurement range
- Six color palettes
- Can withstand drop up to 1 meter
- IP 54 enclosure rating
Phase Verification System
৳ 0.00
Add to cart
Key Features: Megger EZ THUMP V2 12 kV HIGHLY PORTABLE FAULT LOCATION SYSTEM
- Compact, light and rugged field instruments
- Battery and AC line operation
- Automatic end-of-cable and fault locating
- 4-kV or 12-kV output versions available
- Transflective colour display
- ARM® Prelocation
- Fault Pinpointing (Thumping)
- Optional Sectionalising Software*
- Please find in the resources file
- N/A
- N/A
Reviews
There are no reviews yet.