Add to Compare

Sika MonoTop 108 Price In Bangladesh

Name: Sika MonoTop 108 Price In Bangladesh
SKU: 1791598915-57
Price: 1000.00 BDT
Availability: InStock

৳ 1,000.00

Sika MonoTop 108 Water Plug IN

Seal live water leaks instantly with Sika MonoTop® 108 Water Plug IN. Fast-setting, waterproof mortar ideal for concrete repairs in basements, tunnels & more.

Key Features:

Rapid setting – stops active water leaks in seconds
Can be applied underwater or on wet substrates
Chloride-free and non-corrosive
Suitable for overhead and vertical applications
Potable water safe (as per local approvals)
Easy to use – just mix with water
Expands as it sets for a tight seal

... people are viewing this right now

Guaranteed Safe Checkout

Description

Sika MonoTop 108 Water Plug IN

Rapid setting mortar for plugging water leakage instantly

Product Description –

Sika MonoTop 108 Water Plug IN is a rapid-setting, ready-to-use repair mortar designed specifically to instantly stop water leaks and seepage in concrete and masonry. Ideal for emergency repair applications, this high-performance cementitious plugging compound is engineered for fast action—curing in just seconds to form a watertight seal.

Perfect for use in basements, tunnels, retaining walls, manholes, and other below-grade concrete structures, Sika MonoTop 108 Water Plug IN is your go-to solution for sealing live water leaks even under high pressure. The product can be applied directly to wet substrates and is compatible with potable water systems.

Key Features:

Rapid setting – stops active water leaks in seconds
Can be applied underwater or on wet substrates
Chloride-free and non-corrosive
Suitable for overhead and vertical applications
Potable water safe (as per local approvals)
Easy to use – just mix with water
Expands as it sets for a tight seal

Sika water plug, rapid leak repair, waterproof mortar, fast-setting hydraulic cement, instant water stop, basement leak fix, emergency concrete repair, Sika MonoTop 108

Technical Data Sheet – Sika MonoTop 108 Water Plug IN

Product Information:

Property	Value
Appearance / Colour	Powder / Grey
Packaging	5 kg and 15 kg pails
Shelf Life	12 months from date of production
Storage Conditions	Store in dry conditions, tightly sealed, between +5°C and +30°C

Technical Characteristics:

Characteristic	Test Method / Standard	Value
Mixing Ratio	–	~0.25 litres water per 1 kg
Setting Time	ASTM C191	Starts setting: ~30 seconds
Final Set	–	~2 minutes at 20°C
Compressive Strength	EN 196-1	≥ 25 MPa at 24 hours
Application Temperature	–	+5°C to +35°C
Water Resistance	–	Resists water pressure up to 5 bar

Application Details:

Substrate Preparation	Surface must be clean, free of loose material, grease, and dust. Saturate with water before application (leave no standing water).
Mixing Instructions	Add water to powder gradually and mix by hand until a putty-like consistency is achieved. Mix only enough to apply within 30–45 seconds.
Application Method	Press mortar into the leak by hand or trowel. Hold firmly in place for 30–60 seconds until it sets. Wear gloves.
Curing	No special curing required. Avoid exposure to freezing conditions during the initial setting period.

Mould the mortar by gloved hand for a few seconds into a plug.
Apply immediately into the prepared void pressing firmly until the mortar has set.
Remove excess material from the substrate by scraping it away with a spatula or trowel after the sealing is complete.
In case part of putty is washed away due to water pressure, repeat the application till leakage stops fully.
In case of excessive water pressure, drill holes around main leakage point to reduce water pressure and attack main leakage point first and subsequently

Safety & Handling:

Always wear protective gloves, goggles, and dust mask during handling.
Refer to the Safety Data Sheet (SDS) for detailed information on health and safety.

BASIS OF PRODUCT DATA:

All technical data stated in this Product Data Sheet are based on laboratory tests. Actual measured data may vary due to circumstances beyond our control.