236 Starrett Combination Steel Rule Depth / Angle Gage, 6* 32nds / 64ths*

236
Starrett Combination Steel
Rule Depth and
Angle Gages
0-6″

236
This depth gage has an added feature
permitting its use as a protractor for
measuring angles . It is a simple, handy tool
that is a welcome addition to any machinist’s
toolbox .

• The head is graduated both left and right
  to 30, 45, and 60 degrees . The rule can
  be set to any of these angles by swinging
  the rule until the line on the turret
  coincides with the desired angle
• Head is made of hardened steel, ground,
  and nicely polished – 2-5/8″ (66mm)
  long and 1/8″ (3mm) wide
• One side of the base is cut out to permit
  easier and more accurate readings
• The center of the head is recessed so
  that the tool will lay flat to permit more
  accurate measurements
• A tempered rule that has been accurately
  machined divided, is smoothly fitted to
  the head and can be locked in position by
  a knurled nut

236H Series
These versatile gages can be used for
calipering, as a depth gage by simply
reversing the rule, as a protractor, and as a
hook rule when removed from the tool .
Features are the same as the 236 except that
a hook rule and an extra 6″ (150mm) long rod
are furnished with this gage . The rod has a
5/64″ (2mm) diameter so it can measure the
depth of small holes, slots, and recesses that
the rule will not enter